|
 | PIC Development Board with Solderless Breadboard
This is a fully assembeled and tested breadboarding development system for all 18-pin PIC microcontrollers including: 16C52, 16C54, 16C56, 16C58, 16C554, 16C556, 16C558, 16C61, 16C620, 16C621, 16C622, 16C71, 16C710, 16C711, 16C712, 16C715, 16C716, 16C717, 16C84, 16E623, 16E624, 16E625, 16F627, 16F628, 16F83, 16F84, and 16F818.
General Features:
- Overall board dimensions 5.50" x 4.50".
- 2-layer PCB with solder masks and a informative silk screen legends.
- 18 pin ZIF socket for the PIC.
- 350 pin solderless breadboard.
- Power and GND pins run the length of the breadboard on both the top and bottom.
- All 16 microcontroller port pins brought out to an 18 pin inline socket at the top of the breadboard.
- ICSP programming header.
- 4 rubber feet.
Oscillator Options:
- Crystal or ceramic resonator with external capacitors (DC-20MHz).
- Ceramic resonator with internal capacitors (DC-20MHz).
- RC oscillator (both internal and external).
- TTL oscillator (DIP-8 packaged).
All oscillator components are socketed for easy removal, and are configured via a jumper block.
Power Supply Options:- 7805 voltage regulator and heatsink are built pre-installed.
- Power switch and power-on LED pre-installed.
- 2.1mm DC power receptacle is pre-installed for a user supplied power source such as
AC Power Adapter 9 VDC.
Pre-Installed I/O Components:- 4 push buttons.
- 4 LEDs.
- Piezo buzzer.
- RS232 driver chip and DB9F connector for serial communications.
- LCD socket with contrast adjustment pot.
- All I/O signals available on a 14 pin header.
Manufacturer: DHMICRO. Manufacturer's Part Number: BB18.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H01764-01T |
 | PIC Development Board with Solderless Breadboard | $120.00 | In Stock |
|
|
|
|
 | Rapid08 8-Pin PIC Prototyping PCB
This is a bare 1.60" x 2.60" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 8-pin DIP packaged microprocessors. It includes a 12 x 11 pin prototyping area (132 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 6 microcontroller I/O port pins are brought to a clearly labeled strip. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R08.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid14 14-Pin PIC Prototyping PCB
This is a bare 2.00" x 3.25" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 14-pin DIP packaged microprocessors. It includes a 16 x 13 pin prototyping area (208 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 12 microcontroller I/O port pins are brought to a clearly labeled strip. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for two tact push buttons, two LEDs and a peizo buzzer. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R14.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid18i 18-Pin PIC Prototyping PCB
This is a bare 2.00" x 3.25" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 18-pin DIP packaged microprocessors. It includes a 16 x 13 pin prototyping area (208 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 13 microcontroller I/O port pins and ~MCLR are brought to a clearly labeled strip. A footprint for an ICSP programming header is provided. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for two tact push buttons, two LEDs and a peizo buzzer. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R18i.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid18iXL 18-Pin PIC Prototyping PCB w/ RS232
This is a bare 3.50" x 3.25" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 18-pin DIP packaged microprocessors. It includes a 31 x 13 pin prototyping area (403 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 13 microcontroller I/O port pins and ~MCLR are brought to a clearly labeled strip. A footprint for an ICSP programming header is provided. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for two tact push buttons, two LEDs, a peizo buzzer and an RS232 serial interface. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R18iXL.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid28i 28-Pin PIC Prototyping PCB
This is a bare 3.00" x 3.25" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 28-pin DIP packaged microprocessors. It includes a 26 x 13 pin prototyping area (338 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 22 microcontroller I/O port pins and ~MCLR are brought to a clearly labeled strip. A footprint for an ICSP programming header is provided. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for three tact push buttons, three LEDs and a peizo buzzer. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R28i.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid28iXL 28-Pin PIC Prototyping PCB w/ RS232
This is a bare 3.50" x 3.25" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 28-pin DIP packaged microprocessors. It includes a 31 x 13 pin prototyping area (403 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 22 microcontroller I/O port pins and ~MCLR are brought to a clearly labeled strip. A footprint for an ICSP programming header is provided. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for three tact push buttons, three LEDs, a peizo buzzer and an RS232 serial interface. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R28IXL.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid40i 40-Pin PIC Prototyping PCB
This is a bare 3.00" x 4.00" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 40-pin DIP packaged microprocessors. It includes a 26 x 14 pin prototyping area (364 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 33 microcontroller I/O port pins and ~MCLR are brought to a clearly labeled strip. A footprint for an ICSP programming header is provided. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for four tact push buttons, four LEDs and a peizo buzzer. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R40i.
More Product Details ...
|
| | |
|
|
|
|
 | Rapid40iXL 40-Pin PIC Prototyping PCB w/ RS232
This is a bare 4.00" x 4.00" 2-layer PCB with solder masks on both sides and a silk screen legend to guide installation of your components. The board is compatible with all MicroChip 40-pin DIP packaged microprocessors. It includes a 36 x 14 pin prototyping area (504 pins total) with power and ground bus lines running the length of both sides of the prototyping area. All 33 microcontroller I/O port pins and ~MCLR are brought to a clearly labeled strip. A footprint for an ICSP programming header is provided. Oscillator options include footprints for a crystal or ceramic resonator with external capacitors (DC-20MHz), a ceramic resonator with internal capacitors (DC-20MHz), an external RC oscillator or using the internal oscillator. Power supply options include footprints for TO-92 and TO-220 voltage regulators, a 2.1mm DC power receptacle and a power-on LED. User I/O options include footprints for four tact push buttons, four LEDs, a peizo buzzer and an RS232 serial interface. Four corner mounting holes are provided for mounting your finished circuit. Manufacturer: DHMICRO. Manufacturer's Part Number: R40IXL.
More Product Details ...
|
| | |
|
|
