USB Interface Modules Category

8 Channel USB Relay Module This board provides eight SPDT relays that can be controlled by almost any workstation running Windows, Macintosh OSX or LINUX. The relays are rated for up to 1A, 200V. Catalog number: 45658. Brand: Robot Electronics. Brand's Part Number: USB-RLY08. More Product Details ...     Stock Number Buy Product Title Price Status H04565-01B 8 Channel USB Relay Module $92.99 Out of Stock     FTDI Basic Breakout - 5V from Sparkfun This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target. This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector. One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. Catalog number: 45583. Brand: Sparkfun. Brand's Part Number: DEV-10008. More Product Details ...     Stock Number Buy Product Title Price Status H04558-01W FTDI Basic Breakout - 5V $14.99 In Stock     USB Interface Board with 24 Channels (DIP) USB I/O 24 R DIP from Elexol Pty Ltd The USBIO24-DIP is functionally identical to USB Interface Board with 24 Channels but configured as a 50-pin, 0.9" DIP for easier integration into OEM equipment. Catalog number: 22012. Brand: Elexol Pty Ltd. Brand's Part Number: USBIO24RDIP. More Product Details ...     Stock Number Buy Product Title Price Status H02201-01F USB Interface Board with 24 Channels (DIP) $89.99 In Stock           USB Interface Board with 24 Channels USB I/O 24 R from Elexol Pty Ltd The USBIO24 R is the ROHS Compliant version of our previous USB I/O 24 range. The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port. The modules I/O Port pin out and firmware are compatible with the previous versions of the USB I/O24 modules. This module is also available in a DIP form factor: USB Interface Board with 24 Channels (DIP) Catalog number: 33878. Brand: Elexol Pty Ltd. Brand's Part Number: USBIO24-R. More Product Details ...     Stock Number Buy Product Title Price Status H03387-01P USB Interface Board with 24 Channels $71.99 In Stock           USB Plug and Play Dual Channel UART/ FIFO from Elexol Pty Ltd The USBMOD5 is a second generation USB interface module using the FTDI FT2232C Dual Channel USB UART / FIFO IC. The chip provides two independent channels of communications with your electronics using parallel FIFO or serial interfaces at up to 3 Mbaud. Communications to the host workstation is USB 2.0 Full Speed (12 Mbits /Second) compatible. Host drivers for Windows, MAC, LINUX and several flavors of UNIX are available at www.ftdichip.com/FTDriver.htm. Catalog number: 22004. Brand: Elexol Pty Ltd. Brand's Part Number: USBMOD5. More Product Details ...     Stock Number Buy Product Title Price Status H02200-01H USB Plug and Play Dual Channel UART/ FIFO $39.99 In Stock           USB Plug and Play Parallel 8-Bit FIFO Module (USB245R ) from Elexol Pty Ltd The USBMOD4 is a thrid generation USB interface module using the FTDI FT245R USB FIFO. It lets you add a USB interface to your robot or other microcontroller project in less than an hour. Catalog number: 41319. Brand: Elexol Pty Ltd. Brand's Part Number: USB245R. More Product Details ...     Stock Number Buy Product Title Price Status H04131-01C USB Plug and Play Parallel 8-Bit FIFO Module (USB245R ) $24.99 In Stock           USB Plug and Play Parallel 8-Bit FIFO Module (Rev 2) from Elexol Pty Ltd The USBMOD4 is a second generation USB interface module using the FTDI FT245BM USB FIFO. It lets you add a USB interface to your robot or other microcontroller project in less than an hour. The USBMOD4 transfers data between your project and a host PC at up to 8 Million bits per second using 12 I/O pins. It can be interfaced to an MCU using memory mapping, DMA or a simple I/O pin interface. Improvements in this second generation design include reduced external component count, improved power management, cleaner start-up/reset, and an EEPROM which holds USB enumeration data and FT245BM configuration flags. USBMOD4 is not a drop-in replacement for USBMOD2 due to changes in the hardware interface. Host drivers for Windows, MAC, LINUX and several flavors of UNIX are available at www.ftdichip.com/FTDriver.htm. Catalog number: 15172. Brand: Elexol Pty Ltd. Brand's Part Number: USBMOD4. More Product Details ...     Stock Number Buy Product Title Price Status H01517-01F USB Plug and Play Parallel 8-Bit FIFO Module (Rev 2) $24.99 Out of Stock           USB Plug and Play Serial Module (USB232R ) from Elexol Pty Ltd The USB232R is a third generation USB interface module using the FTDI FT232R USB UART. It lets you add a USB interface to microcontroller projects or equipment with serial interfaces in less than an hour. Catalog number: 41301. Brand: Elexol Pty Ltd. Brand's Part Number: USB232R. More Product Details ...     Stock Number Buy Product Title Price Status H04130-01E USB Plug and Play Serial Module (USB232R ) $24.99 In Stock           USB Plug and Play Serial Module (Rev 2) from Elexol Pty Ltd The USBMOD3 is a second generation USB interface module using the FTDI FT232BM USB UART. It lets you add a USB interface to your robot or other microcontroller project in less than an hour. The USBMOD transfers data between your project and a host PC using 4 I/O pins in a simple serial interface. It has a maximum data transfer rate of 1000k baud using RS232 or 3000k baud use RS422 or RS485. Improvements in this second generation design include reduced external component count, improved power management, cleaner start-up/reset, and an EEPROM which holds USB enumeration data and FT232BM configuration flags. USBMOD3 is not a drop-in replacement for USBMOD1 due to changes in the hardware interface. Host drivers for Windows, MAC, LINUX and several flavors of UNIX are available at www.ftdichip.com/FTDriver.htm. Catalog number: 15164. Brand: Elexol Pty Ltd. Brand's Part Number: USBMOD3. More Product Details ...     Stock Number Buy Product Title Price Status H01516-01H USB Plug and Play Serial Module (Rev 2) $24.99 In Stock

Home Gift Guide Contact Us Policies Shipping: USA Shipping: International Gift Guide Product Index Sale Items! Show Shopping Cart Quick Order By Item Number Links Tutorials and Projects Al's WEB Log Jobs at Hobby Engineering Frequently Asked Questions The content on this page was updated on 01/31/2012