|
 | Mabuchi FA-130 Motor
Flat housing, metal brush motor. Operating voltage 1.5VDC to 3VDC. At 1.5VDC no load output is 9100RPM at 200mA, stall torque is 26g-cm (0.36oz-in) at 2.2A and maximum efficiency output is 6990RPM delivering 6g-cm (0.08oz-in) torque while drawing 660mA current.
The motor has a 2mm (0.078") diameter shaft that extends 7.3mm (0.29") beyond the front bearing. Manufacturer: MABUCHI. Manufacturer's Part Number: FA-130.
More Product Details ...
|
| | |
|
|
|
|
| | Mabuchi RF-500T-10750 Motor
This is a pancake shaped metal can motor. I don't have a data sheet so all stated specifications are based on testing and measurement of one sample at my workbench. At 6VDC no load speed is 1890 RPM at 15mA, stall current is 170 mA.
The motor has a 2mm (0.078") diameter shaft that extends 8.5mm (0.33") beyond the front bearing. Manufacturer: MABUCHI. Manufacturer's Part Number: RF-500T-10750.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04272-01U |
 | Mabuchi RF-500T-10750 Motor | $6.99 |
In Stock |
|
|
|
|
 | Motor: Gear Motor Performance Upgrade
A high power motor that fits in the same form factor as used by the GM2/GM3/GM8/GM9 style gear motors. When retrofitted (an easy process after removing the GM2/3/8/9 motor strap), it nearly triples the output speed and doubles the torque!
Be forewarned - the increase in power output comes with an suitable increase in power consumption! When used in a GM2/3/8/9, the power output is considerably higher.
The motor has an 0.08" (2mm) output shaft. The main can body dimensions are 0.6" x 0.8" x 1" (15mm x 20mm x 25mm). The length including the front and rear alignment pads is 1.15" (29mm) and the overall length including the output shaft is 1.5" (38mm). Manufacturer's Part Number: RM2.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H01205-01H |
 | Motor: Gear Motor Performance Upgrade | $2.99 |
In Stock |
|
|
|
|
 | Motor: Standard
This 030 form-factor motor with precious-metal brushes offers pretty good performance for a flat-sided motor. It turns 7400 rpm @ 4.7V while drawing 150mA and providing 0.06 oz*in (4 gm*cm) torque -- 0.24 oz*in (17 gm*cm) at stall.
The motor has an 0.06" (1.5mm) output shaft. The main can body dimensions are 0.5" x 0.6" x 0.7" (12mm x 15mm x 19mm). The length including the front and rear alignment pads is 0.8" (21mm) and the overall length including the output shaft is 1" (27mm). Manufacturer's Part Number: RM1A.
More Product Details ...
|
| | |
|
|
|
|
 | Solar Motor 01 from Tamiya
This is a DC motor that operates efficiently at low voltages making it ideal for solar power applications. The motor output is 1430 RPM at 0.5VDC and 4500 at 1.5VDC. The motor comes with a metal mounting bracket and three pinion gears (8, 10 and 12 teeth). Manufacturer: Tamiya. Manufacturer's Part Number: 76004.
More Product Details ...
|
| | |
|
|
|
|
 | Solar Motor 02 from Tamiya
This is a DC motor that operates efficiently at low voltages making it ideal for solar power applications. The motor output is 380 RPM at 0.5VDC and 1280 at 1.5VDC. The motor comes with a metal mounting bracket and three pinion gears (8, 10 and 12 teeth). Manufacturer: Tamiya. Manufacturer's Part Number: 76005.
More Product Details ...
|
| | |
|
|
|
|
 | Stepper Motor (Unipolar ) from Parallax
Stepper motors are ideal for precision control, and may be easily operated in forward and reverse directions at varying speeds. This four-phase motor has a step angle of 3.6 degrees and requires 12 VDC for operation. It has a coil resistance of 90 ohms. Manufacturer: Parallax. Manufacturer's Part Number: 27964.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H01431-01Z |
 | Stepper Motor (Unipolar ) |
| Qty | Price | | 1 to 4 | $15.99 | | 5 to 9 | $15.19 | | 10 or more | $14.39 |
|
In Stock |
|
|