
Click here for high res picture ... |
The Ether I/O 24 is an UDP/IP controlled digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.
This module is also available in a DIP form factor:
Ethernet Digital Interface Module Ether I/O 24 R DIP
The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device.
Features:
- Supports ARP, BOOTP, DHCP, ICMP and UDP/IP Protocols
- Industry standard 10BaseT Ethernet Interface with an industry standard RJ-45 Connector
- 24 independently programmable signal lines with configurable CMOS, TTL or Schmitt Trigger thresholds and programmable pull-ups per line
- Easy connection by three 10 way box headers to suit low cost, standard IDC or Crimp connectors
- On-board 50 MIPS flash micro-controller may be reprogrammed to suit specific applications
- Integrated Switch Mode Voltage Regulator allows power from any 8-32V DC Power source
- User 5V 500mA output to power external Interface boards or sensors
- Compact module measures only 72mm x 72mm x 24mm
- Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to another ETHER I/O 24 module without host connection or to any Internet Port by router connection
- On board EEPROM allows all ports to power up in a user programmable state
- Programmable Fixed IP or Dynamic IP assignment from a DHCP server
- Small packet size and connectionless protocol allows for Real Time sensing and control
- Can be connected to a wireless network gateway or access point for wireless operation
- Low Power consumption only 1.1W fully operational
Data Sheet
User Manual
| Quick Facts | | Catalog Number: | 42168 | | Brand: | Elexol Pty Ltd | | Brand's Part Number: | EtherIO24R | | Buy Now: |
 |
|