Cart 0
SparkFun Triple Axis Accelerometer Breakout - ADXL345

SparkFun Triple Axis Accelerometer Breakout - ADXL345

  • 1795

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.

The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0 degrees;.

Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.

Not sure which accelerometer is right for you? Our Accelerometer and Gyro Buying Guide might help!


  • 2.0-3.6VDC Supply Voltage
  • Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
  • Tap/Double Tap Detection
  • Free-Fall Detection
  • SPI and I2C interfaces


Replaces: SEN-09156

Brand: Sparkfun
Brand Part Number: SEN-09836
Our Part Number: h5633


Arduino Uno R3
Header .1" Male 40-Pin Break-Away for PCB
SparkFun Triple Axis Accelerometer Breakout - ADXL362
SparkFun Triple Axis Accelerometer Breakout - LIS331

We Also Recommend