This is a set of optional RPM Axle Carriers/Steering Blocks for the Traxxas Revo. These will also work on the T/E Maxx 2.5R and 3.3 versions.

• Constructed of molded composite material, black in color
• Wall thickness around the pillow-balls has been increased by 40% eliminating split walls
• Over 20% more material supports the pillow-balls, preventing them from pulling through
• Redesigned reinforcing rib supporting tie rod mount
• Redesigned boot lock tabs for easier removal of the silicone boots
• Press-fit bearings in the carrier for reduced axle movement
• Two-piece pillow-ball set screws use aluminum and Delrin for the ultimate in holding power under extreme situations

• Two Axle Carriers/Steering Blocks
• Two 12x21x5mm Inner Bearings
• Two 6x15x5mm Outer Bearings
• Four Aluminum Set Screws
• Four Delrin Bushing Caps
• Instruction Sheet

• Installing on axles, no modifications required

• Replacement Bearing Set, RPMC8570
• Replacement Pillow-Ball Set Screws, RPMC0800
• Do not use the Traxxas #5356 Long Travel Rocker Arm Set with these Axle Carriers. Doing so will void the RPM warranty.