| Ethernet Interface Modules |
| |
|
 | Ethernet Digital Interface Module Ether I/O 24 R
The Ether I/O 24 is an UDP/IP controlled digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.
This module is also available in a DIP form factor:
Ethernet Digital Interface Module Ether I/O 24 R DIP
Catalog number: 42168. Brand: Elexol Pty Ltd. Brand's Part Number: EtherIO24R.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04216-01B |
 | Ethernet Digital Interface Module Ether I/O 24 R | $109.99 |
In Stock |
|
 |
|
|
 | Ethernet Digital Interface Module Ether I/O 24 R DIP
The Ether I/O 24 is an integrated, micro-controller based network interface board with 24 digital user I/O lines. The modules firmware and hardware enable your devices or other modules to be connected to a generic Ethernet network and controlled using a command sent over the network via UDP. Each of the 24 User I/O lines operates at 5V DC maximum levels and can be independently programmed as an Input whose state can be remotely sensed via another network device, an Input whose state is internally checked and transmitted when a change occurs, or an output whose state can be remotely controlled by another networked device.
This is is the Dual In-Line Package (DIP) equivalent of our existing
Ethernet Digital Interface Module Ether I/O 24 R. Catalog number: 43935. Brand: Elexol Pty Ltd. Brand's Part Number: ETHERIO24RDIP.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04393-01L |
 | Ethernet Digital Interface Module Ether I/O 24 R DIP | $109.99 |
In Stock |
|
 |
|
|
 | Ethernet Interface Board with 24 Channels - Advanced DIP Manufacturer's Product Name: Ether IO24 PIC R DIP from Elexol Pty Ltd
The Ether IO24 PIC R is an integrated, micro-controller based network interface board with 24 digital user I/O lines and is the next generation of our Ether IO24 Range
The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device Catalog number: 46979. Brand: Elexol Pty Ltd. Brand's Part Number: ETHERIO24-PIC-R-DIP.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04697-01R |
 | Ethernet Interface Board with 24 Channels - Advanced DIP | $125.00 |
In Stock |
|
|
|
|
 | Ethernet Interface Board with 24 Channels - Advanced Manufacturer's Product Name: Ether IO24 PIC R from Elexol Pty Ltd
The Ether IO24 PIC R is an integrated, micro-controller based network interface board with 24 digital user I/O lines and is the next generation of our Ether IO24 Range
The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device Catalog number: 46615. Brand: Elexol Pty Ltd. Brand's Part Number: EtherIO24PICR.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04661-01Y |
 | Ethernet Interface Board with 24 Channels - Advanced | $125.00 |
In Stock |
|
|
|
|
 | Spinneret Ethernet Microcontroller Module With Web Server
The Spinneret Web Server may be small at less than 1 by 4 inches but it is a feature packed development platform. The built-in MicroSD card socket and real-time clock allow ample room for time-stamped file and data storage, and the oversized EEPROM can store non-volatile data for use when there is no MicroSD card present.
Catalog number: 43042. Brand: Parallax. Brand's Part Number: 32203.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04304-01V |
 | Spinneret Ethernet Microcontroller Module With Web Server | $59.99 |
In Stock |
|
|
| USB Interface Modules |
| |
|
 | 8 Channel USB Relay Module
This board provides eight SPDT relays that can be controlled by almost any workstation running Windows, Macintosh OSX or LINUX. The relays are rated for up to 1A, 200V. Catalog number: 45658. Brand: Robot Electronics. Brand's Part Number: USB-RLY08.
More Product Details ...
|
| | |
|
|
|
|
 | FTDI Basic Breakout - 5V - Female Header Output Manufacturer's Product Name: FTDI Basic Breakout - 5V from Sparkfun
This is a basic breakout board for the FTDI FT232RL USB to serial IC. This version of the board includes a female header socket so it can plug directly into the male pins of an Arduino programming header. Catalog number: 47118. Brand: Sparkfun. Brand's Part Number: DEV-09716.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04711-01B |
 | FTDI Basic Breakout - 5V - Female Header Output | $14.99 |
In Stock |
|
|
|
|
 | FTDI Basic Breakout - 5V - Solder Pad Output Manufacturer's Product Name: FTDI Basic Breakout - 5V from Sparkfun
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The output solder pads use the Arduino programming layout but it can also be used for general serial applications. Catalog number: 45583. Brand: Sparkfun. Brand's Part Number: DEV-10008.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04558-01W |
 | FTDI Basic Breakout - 5V - Solder Pad Output | $14.99 |
In Stock |
|
|
|
|
 | USB Interface Board with 24 Channels Manufacturer's Product Name: USB I/O 24 R from Elexol Pty Ltd
The USBIO24 R is the ROHS Compliant version of our previous USB I/O 24 range. The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port. The modules I/O Port pin out and firmware are compatible with the previous versions of the USB I/O24 modules.
This module is also available in a DIP form factor:
USB Interface Board with 24 Channels (DIP) Catalog number: 33878. Brand: Elexol Pty Ltd. Brand's Part Number: USBIO24-R.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H03387-01P |
 | USB Interface Board with 24 Channels | $71.99 |
In Stock |
|
 |
|
|
 | USB Interface Board with 24 Channels (DIP) Manufacturer's Product Name: USB I/O 24 R DIP from Elexol Pty Ltd
The USBIO24-DIP is functionally identical to
USB Interface Board with 24 Channels but configured as a 50-pin, 0.9" DIP for easier integration into OEM equipment. Catalog number: 22012. Brand: Elexol Pty Ltd. Brand's Part Number: USBIO24RDIP.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H02201-01F |
 | USB Interface Board with 24 Channels (DIP) | $89.99 |
In Stock |
|
 |
|
|
 | USB Plug and Play Dual Channel UART/ FIFO
The USBMOD5 is a second generation USB interface module using the FTDI FT2232C Dual Channel USB UART / FIFO IC. The chip provides two independent channels of communications with your electronics using parallel FIFO or serial interfaces at up to 3 Mbaud. Communications to the host workstation is USB 2.0 Full Speed (12 Mbits /Second) compatible.
Host drivers for Windows, MAC, LINUX and several flavors of UNIX are available at www.ftdichip.com/FTDriver.htm. Catalog number: 22004. Brand: Elexol Pty Ltd. Brand's Part Number: USBMOD5.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H02200-01H |
 | USB Plug and Play Dual Channel UART/ FIFO | $39.99 |
In Stock |
|
 |
|
|
 | USB Plug and Play Parallel 8-Bit FIFO Module (USB245R )
The USBMOD4 is a thrid generation USB interface module using the FTDI FT245R USB FIFO. It lets you add a USB interface to your robot or other microcontroller project in less than an hour. Catalog number: 41319. Brand: Elexol Pty Ltd. Brand's Part Number: USB245R.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04131-01C |
 | USB Plug and Play Parallel 8-Bit FIFO Module (USB245R ) | $24.99 |
In Stock |
|
 |
|
|
 | USB Plug and Play Parallel 8-Bit FIFO Module (Rev 2)
The USBMOD4 is a second generation USB interface module using the FTDI FT245BM USB FIFO. It lets you add a USB interface to your robot or other microcontroller project in less than an hour. The USBMOD4 transfers data between your project and a host PC at up to 8 Million bits per second using 12 I/O pins. It can be interfaced to an MCU using memory mapping, DMA or a simple I/O pin interface.
Improvements in this second generation design include reduced external component count, improved power management, cleaner start-up/reset, and an EEPROM which holds USB enumeration data and FT245BM configuration flags. USBMOD4 is not a drop-in replacement for USBMOD2 due to changes in the hardware interface.
Host drivers for Windows, MAC, LINUX and several flavors of UNIX are available at www.ftdichip.com/FTDriver.htm. Catalog number: 15172. Brand: Elexol Pty Ltd. Brand's Part Number: USBMOD4.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H01517-01F |
 | USB Plug and Play Parallel 8-Bit FIFO Module (Rev 2) | $24.99 |
Out of Stock |
|
 |
|
|
 | USB Plug and Play Serial Module (Rev 2)
The USBMOD3 is a second generation USB interface module using the FTDI FT232BM USB UART. It lets you add a USB interface to your robot or other microcontroller project in less than an hour. The USBMOD transfers data between your project and a host PC using 4 I/O pins in a simple serial interface. It has a maximum data transfer rate of 1000k baud using RS232 or 3000k baud use RS422 or RS485.
Improvements in this second generation design include reduced external component count, improved power management, cleaner start-up/reset, and an EEPROM which holds USB enumeration data and FT232BM configuration flags. USBMOD3 is not a drop-in replacement for USBMOD1 due to changes in the hardware interface.
Host drivers for Windows, MAC, LINUX and several flavors of UNIX are available at www.ftdichip.com/FTDriver.htm. Catalog number: 15164. Brand: Elexol Pty Ltd. Brand's Part Number: USBMOD3.
More Product Details ...
|
| | |
|
 |
|
|
 | USB Plug and Play Serial Module (USB232R )
The USB232R is a third generation USB interface module using the FTDI FT232R USB UART. It lets you add a USB interface to microcontroller projects or equipment with serial interfaces in less than an hour. Catalog number: 41301. Brand: Elexol Pty Ltd. Brand's Part Number: USB232R.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04130-01E |
 | USB Plug and Play Serial Module (USB232R ) | $24.99 |
In Stock |
|
 |
| Connector Boards |
| |
|
 | 50 Pin Header I/O Board
The I/O 24 50 Pin IDC Connector Board routes the I/O ports of a
Ethernet IO24 Digital I/O Module or
USBIO24 Digital I/O Module MKIII to a 50 Pin IDC Connector for industrial applications. Catalog number: 20263. Brand: Elexol Pty Ltd. Brand's Part Number: IO50PIN.
More Product Details ...
|
| | |
|
 |
|
|
 | Analog-to-Digital (ADC) and Digital-to-Analog (DAC) I/O Board
The Analog I/O Board is an accessory board that allows the implementation of an analog interface to Elexols existing I/O 24 Range. The Elexol I/O 24 Range consists of Ether I/O 24 R, Ether I/O 24 DIP R, USB I/O 24 R and the USB I/O 24 DIP R
Catalog number: 46086. Brand: Elexol Pty Ltd. Brand's Part Number: ADIO.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04608-01Z |
 | Analog-to-Digital (ADC) and Digital-to-Analog (DAC) I/O Board | $34.99 |
In Stock |
|
|
|
|
 | Combo Relay and Opto Board
The Combo Board provides 4 output relays and 4 Opto Isolated inputs.
- 4 x Opto Insulated Inputs
- 4 x Form C type Relays Rated at 5A @ 240VAC with a 12V Coil
- LED indication for relay and opto status
- Screw Terminal Blocks for Opto inputs
- Easy connection by 0.1 pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules
Catalog number: 29413. Brand: Elexol Pty Ltd. Brand's Part Number: COMBO.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H02941-01W |
 | Combo Relay and Opto Board | $45.99 |
In Stock |
|
 |
|
|
 | Connector / LED Indicator I/O Board
This board provides 8 screw terminal blocks to simplify wiring of control equipment.- Screw terminal blocks for attaching wires to each channel
- LED indicator for each I/O
- Solder pads for installation of pull-up or pull-down resistors
- 72mm board width allows use of standard DIN mounting rails
- 0.1 inch 2x5 male header for connection to controller
- Includes 12 inch (30cm) ribbon cable with female headers at each end for connection to
USBIO24 Digital I/O Module MKIII,
Ethernet IO24 Digital I/O Module or other control equipment. Catalog number: 20248. Brand: Elexol Pty Ltd. Brand's Part Number: IOCONNECTOR.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H02024-01B |
 | Connector / LED Indicator I/O Board | $24.99 |
In Stock |
|
 |
|
|
 | GPIO-32
The GPI/O 32 Board is an accessory board that allows up to 32 I/O pins to be controlled through a single Port connection on Elexols I/O 24 Range. The Elexol I/O 24 Range consists of Ether I/O 24 R, Ether I/O 24 DIP R, USB I/O 24 R and the USB I/O 24 DIP R.
Catalog number: 46094. Brand: Elexol Pty Ltd. Brand's Part Number: GPIO.
More Product Details ...
|
| | |
|
|
|
|
 | I/O Port Status Board
The Port Status Board is an accessory board that allows visual indication as well as offering test points to the I/O pins of a single port on Elexols IO24 Controller Range.
The board consists of 8 buffered LED indicators that provide a visual indication of the current state on the port.
There are also two 10-way box headers so that it can be connected in-line without inhibiting the function of the current port. The connection between the IO24 module and the Port Status Board is via a 30 cm IDC connection cable. This cable is provided with the board.
The board has been designed to a 72mm standard width so that it can easily be mounted in DIN rail mounting modules. Catalog number: 47126. Brand: Elexol Pty Ltd. Brand's Part Number: IOPORTSTATUS.
More Product Details ...
|
| | |
|
 |
|
|
 | I/O Voltage Translator Board
The Voltage Translator Board is an accessory board that performs level conversion of a 5V interface (I/O24 or microcontroller) to a 3V3 or lower interface. This board can be connected to a single port on Elexols IO24 Controller Range.
The board consists of two 74LVC4245 Bus Transceivers that are used for the level conversion. Each device is configured for a set level conversion of either 5V to 3V3 or 3V3 to 5V for a single 8 bit port.
The jumpers on the board are used to route the direction of the signal for the voltage translation. Each jumper needs to be configured in the correct direction for the board to operate. 5V IN to 3V3 OUT and 3V3 IN to 5V OUT.
The connection between the IO24 Controller Module and the Voltage Translator board is via a 30 cm IDC connection cable. This cable is provided with the board.
The board has been designed to a 72mm standard width so that it can easily be mounted in DIN rail mounting modules.
Catalog number: 47134. Brand: Elexol Pty Ltd. Brand's Part Number: IOVOLTAGE.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H04713-01X |
 | I/O Voltage Translator Board | $26.99 |
In Stock |
|
 |
|
|
 | Opto-Isolated I/O Board
This board provides 8 optically isolated input channels
- Accepts inputs from 3 to 24V AC or DC
- LED indicator for each channel
- Screw terminal blocks for inputs
- 72mm board width allows use of standard DIN mounting rails
- 0.1 inch 2x5 male header for connection to output logic
- Includes 12 inch (30cm) ribbon cable with female headers at each end for connection to
USBIO24 Digital I/O Module MKIII,
Ethernet IO24 Digital I/O Module or other control logic. Catalog number: 20230. Brand: Elexol Pty Ltd. Brand's Part Number: IOOPTO.
More Product Details ...
|
| | |
|
 |
|
|
 | Relay Board
This board provides 8 relays to control high voltage or high current equipment.
- Relays switch contacts rated 5A at 240VAC or 30VDC
- LED indicator for each relay
- Screw terminal blocks for relay switch contacts
- 72mm board width allows use of standard DIN mounting rails
- 0.1 inch male header for connection to control logic
- Includes 12 inch (30cm) ribbon cable with female headers at each end for connection to
USBIO24 Digital I/O Module MKIII,
Ethernet IO24 Digital I/O Module or other control logic. Catalog number: 20222. Brand: Elexol Pty Ltd. Brand's Part Number: IORELAY.
More Product Details ...
|
| | |
|
 |
|
|
 | Switch and LED I/O Board
This board provides 8 switch inputs for control equipment.- Each channel has both a tact momentary switch and a slide switch wired in parallel
- LED indicator for each I/O
- 72mm board width allows use of standard DIN mounting rails
- 0.1 inch 2x5 male header for connection to controller
- Includes 12 inch (30cm) ribbon cable with female headers at each end for connection to
USBIO24 Digital I/O Module MKIII,
Ethernet IO24 Digital I/O Module or other control equipment. Catalog number: 20255. Brand: Elexol Pty Ltd. Brand's Part Number: IOSWITCH.
More Product Details ...
|
| | |
| Stock Number | Buy | Product Title | Price | Status | |
H02025-01J |
 | Switch and LED I/O Board | $34.99 |
In Stock |
|
 |
|
|
 | ULN2803 Switch Board
The ULN2803 Switch Board allows higher voltage and current devices to be interfaced to the low level logic.
- 1 x ULN2803 High Voltage / High Current Transistor Array
- Status LED for each channel
- Screw Terminal Blocks for outputs
- Easy connection by 10-way box header to suit standard IDC connector for connection to the I/O port
- 72mm Standard width for DIN Rail Modules
- Dimensions 2.6 X 2.8 X 1 inches (65 X 72 X 25.4mm)
Catalog number: 29405. Brand: Elexol Pty Ltd. Brand's Part Number: ULNSWITCH.
More Product Details ...
|
| | |
|
 |